Transform aluminium & glass fabrication with intelligent ERP.
Fabrication is not a retail counter.
Slow, risky quotations
With the customer waiting, the owner adds up several profile sections, glass, hardware and fittings by hand to reach a per-square-foot rate. One small mistake can wipe out the profit on the order.
Losses on small windows
Windows under 4 ft take the same labour and hardware as larger ones. Billed by plain square feet, the workshop ends up paying from its own pocket.
Supplier rates that keep changing
Aluminium price lists across many profiles and finishes change every few days. A quote sent on an old rate is a direct loss.
Scrap and offcut wastage
Without a proper plan for cutting 12 ft and 20 ft bars, expensive aluminium ends up as scrap.
Smart quotation & pricing engine
Price a window in front of the customer.
- 1Design type
- 2Aluminium brand
- 3Profile gauge
- 4Colour / finish
- 5Window size (W × H)
- Section-wise running feet calculated first, then glass, hardware tier, installation, transport and your target margin are added.
- The grand total is divided by billable quantity to give the exact selling rate.
- Rate lock: each saved quotation snapshots that day's aluminium and glass rates. If the customer returns after the market moves, you see locked versus current rate and choose which to apply.
Quotation builder
Illustrative calculator — sample figures, not a quotationBilling rule applied
Both sides are 4 ft or more, so the opening bills by square feet (W × H).
- Billable quantity
- 24.00 sq. ft
- Installation & transport
- Included (turnkey)
Selling rate per sq. ft
Rs 1,838
Grand total Rs 44,122
The customer sees one clean rate and total — no section-wise costs or profit.
Dual-track pricing engine
One quotation. Two separate views.
- Measurement unit
Customer viewSwitches automatically between square feet (W ≥ 4 ft and H ≥ 4 ft) and running feet (2W + 2H when any side is under 4 ft).
Factory internal viewAlways calculates exact section-wise running feet and piece counts for every profile.
- Rate visibility
Customer viewOne clean per-sq.-ft or per-running-ft rate and a grand total.
Factory internal viewExact running-foot cost per section, plus glass, hardware, labour and net profit %.
- Glass & sheet
Customer viewBills the full external opening (W × H), or custom split sizes for half-glass / half-sheet designs.
Factory internal viewCalculates glass rebate cutting clearances and divider rails for the workshop.
- Services
Customer viewStates clearly whether installation and transport are included (turnkey) or excluded (supply only).
Factory internal viewRecalculates the per-sq.-ft rate automatically when service options change.
Parametric design library
Formulas for every standard design, built in.
Profile role mapping — sliding window
- Outer frame left / right / top
- DC30B
- Bottom track
- DC26B
- Sliding panel top / bottom
- M24
- Lock side
- M28
- Centre interlock
- M23
- Mosquito net
- D29
2-panel sliding
3-panel sliding
Casement / openable
Fixed glazing
Top-hung ventilator + sliding
Curtain wall
Swing door
Half glass / half sheet
Supplier rate management
Every brand, section, gauge and finish in one rate card.
- Multi-brand profiles. Local and imported aluminium profile brands in one database.
- Gauge & finish mapping. Each section is linked to its real available gauges — from 0.99 mm up to heavy curtain-wall sections — and finish columns.
- Bar rate to running-foot conversion. Suppliers quote per 12 ft or 20 ft bar; the system converts to exact per-foot cost and updates all rates when a new price list arrives.
Automated document generation
Approve a quotation. Get three documents.
Customer bill
1For the customer
- Company logo & window design
- Brand, gauge, colour, size
- Billable sq. ft / running ft
- Rate, advance & balance
No internal costs or profit shown
Owner's costing sheet
2Owner / admin only
- Section-wise running-foot consumption
- Aluminium, glass & hardware cost
- Labour
- Net profit in rupees and percent
Restricted by role
Workshop cutting sheet
3For the cutting master
- Every piece's cutting size in feet & inches
- Section code per piece
- Glass cutting sizes
- Interlock orientation guide
No rates shown to workshop staff
Material optimisation
Cut more windows from fewer bars.
- Bars are planned per section, so each profile is cut from its own stock.
- Usable offcuts are stored as offcut stock instead of scrap.
- When a later job needs that length, the cutting master is prompted to use the offcut first.
- Bar 1: D29, 12 ftOffcut 11.3"44"44"44"
- Bar 2: DC26B, 12 ftOffcut 3.5"70"70"
- Bar 3: DC30B, 12 ftOffcut 3.5"70"70"
- Bar 4: DC30B, 12 ftOffcut 1.3"48"48"46"
- Bar 5: M23, 20 ftOffcut 20.8"46"46"46"46"34"
- Bar 6: M24, 20 ftOffcut 34.5"34"34"34"34"34"34"Save offcut
- Bar 7: M28, 20 ftOffcut 8.8"46"46"46"46"46"
- Bars used
- 7
- Pieces
- 26
- Bar length used in this plan
- 93%
Offcuts long enough to reuse go into offcut stock. When a later order needs that length, the system tells the cutting master to use the offcut first.
Business operations
The rest of the business, connected.
Purchase orders
Raw material purchasing tied to real job requirements.
Supplier ledgers
Every supplier balance and payment in one place.
Customer advances & balances
Advance received and balance due on every order.
Installation status
Measurement, cutting, assembly and installed — tracked per job.
Role-based access
Salespeople don't see profit. Workshop staff don't see rates.
Offcut stock
Reusable offcuts are stocked and suggested for the next matching cut.
From first inquiry to final bill
- 01
Customer inquiry
- 02
Measurements
- 03
Quotation
- 04
Approval
- 05
Material planning
- 06
Cutting
- 07
Assembly
- 08
Installation
- 09
Final billing
Why fabricators choose this system
Built for real market practice
Designed around how Pakistan's aluminium and glass market actually works — the 4 ft running-foot rule, section-wise running-foot costing and supplier bar rate lists.
Little training needed
A salesperson or receptionist can price a complex window by selecting from dropdowns, without long training.
Your formulas, your rates
Every workshop and showroom has its own cutting allowances and formulas. We configure each formula and rate matrix to match your business.
Deployment and support
- Can you customise your ERP and supply chain systems to match our business rules?
- Yes. Unlike rigid off-the-shelf software, we tailor modules to your formulas, ledgers and reporting structures — whether you are a distributor, a textile manufacturer or an aluminium fabricator.
- Do you provide training and after-sales support?
- Every deployment includes staff training, data migration from your old registers or software, and ongoing technical support led by our engineering team.
Industries
See the Aluminium & Glass ERP system live
Tell us how your business runs today. We'll show you the system working on your own workflows.